Communicate with Supplier? Supplier
Jane Ms. Jane
What can I do for you?
Chat Now Contact Supplier
 Tel:86-010-65856090 Email:jane.xiao@baoshihose.com

Drilling Hose Wire Spiral - manufacturer, factory, supplier from China

(Total 24 Products for Drilling Hose Wire Spiral)

  • Drilling Rubber Hose Wire Spiral

    Drilling Rubber Hose Wire Spiral

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: ZTJG

    The rotary drilling hose is used between the top of the standpipe and the rotating knuckles running up and down Marine slurry hose is used for high pressure slurry transportation between barge and offshore drilling platform usually more than 13 5m in length Shorter hose 9m or less used between pump and drilling rig i...

    Contact Now

  • Valve Body and Seat for Drilling Mud Pump

    Valve Body and Seat for Drilling Mud Pump

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: FTFZ

    Generally speaking a mud pump needs six sets of valve assembly divided into three in and three out and some fracturing trucks are equipped with valve assembly which is relatively small valve assembly is suitable for various domestic fracturing trucks fracturing pumps and mud pumps Valve Body And Valve

    Contact Now

  • Valve Body and Seat of Drilling Mud Pump

    Valve Body and Seat of Drilling Mud Pump

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: FTFZ

    Valve assembly refers to a set consisting of Valve body Valve seat and Valve rubber The Valve assembly is an important part of the hydraulic end of the mud pump used for drilling and plays a role in unidirectional mud

    Contact Now

  • Rubber High Wear-Resistant Sand-blasting Hose

    Rubber High Wear-Resistant Sand-blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Diameter of abrasion resistant sand blasting pipe and inner diameter of hose wall thickness often refers to the thickness of inner glue outer diameter refers to the largest outer circle Products are mainly used in various tunnel projects tunnels caverns slope

    Contact Now

  • Rubber Wear-Resistant Sand-blasting Hose

    Rubber Wear-Resistant Sand-blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    The general working pressure of abrasion resistant sand blasting rubber pipe is less than 12 bars and the blasting pressure can reach 36 bars with higher blasting pressure Sometimes vacuum negative pressure parameters such as 0 8 bars to 0 9 bars are needed Common temperature range is 30 80 C and common wear...

    Contact Now

  • Common Wear-Resistant Sandblasting Rubber Hose

    Common Wear-Resistant Sandblasting Rubber Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Heavy duty sandblasting pipe is used in equipment sandblasting gravel fine pebble mud and other use environment The spiral steel wire is embedded in the sand blasting vacuum tube and the vacuum negative pressure can reach 0 9 bar in general High Wear resistance Sand Blast

    Contact Now

  • Common Rubber Wear-Resistant Sandblasting Hose

    Common Rubber Wear-Resistant Sandblasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Light Sand blasting Pipe Usually used in such environments as ship sandblasting quicksand operation etc The common inner glue is made of wear resistant NBR natural rubber material and the outer glue is packed with compound glue High Wear resistance Sand Blast

    Contact Now

  • Rubber Wear-Resistant Sandblasting Hose

    Rubber Wear-Resistant Sandblasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Wear resistant sand blasting rubber pipes are usually classified into light sand blasting pipes and heavy sand blasting pipes according to the working conditions and the loss degree of material particles to the conveying medium Spiral steel wire will make them suitable for negative pressure environment High Wear...

    Contact Now

  • Common Rubber Wear-Resistant Sand Blasting Hose

    Common Rubber Wear-Resistant Sand Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Common materials of abrasion resistant sand blasting hose abrasion resistant materials are usually used for internal and external rubber of sand blasting hose such as NBR acrylonitrile butadiene copolymer SBR oil filled styrene butadiene rubber or PARA rubber trilobal rubber with better performance of imported hose...

    Contact Now

  • Common Wear-Resistant Sand Blasting Rubber Hose

    Common Wear-Resistant Sand Blasting Rubber Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Uses of abrasion resistant sand blasting rubber pipe It is mainly used for conveying solid particles such as granules gravel cement quicksand concrete gypsum and so on It is suitable for all kinds of tunnel engineering tunnel tunnel and other engineering operations High Wear resistance Sand Blast Hose 1

    Contact Now

  • Rubber Wear-Resistant Sand Blast Hose

    Rubber Wear-Resistant Sand Blast Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Wear resistant sand blasting rubber pipe is a kind of material conveying pipe Common black sub yellow or transparent external tape wrapping is the majority common between the internal and external tape steel wire to suit negative pressure conditions High Wear resistance Sand Blast Hose 1 Features The internal rubber...

    Contact Now

  • Abrasion-resistant Heavy Rubber Sand Blasting Hose

    Abrasion-resistant Heavy Rubber Sand Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Structure of Sandblasting Rubber Tube 1 External rubber layer using SBR NR mixed conductive rubber 2 Inner rubber layer NBR high wear resistant rubber 3 Reinforcement layer using high

    Contact Now

  • Abrasion-resistant Heavy Sand Blasting Hose

    Abrasion-resistant Heavy Sand Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Sandblasting rubber pipe is a kind of material conveying hose which is used to convey abrasive media with large friction coefficient This kind of rubber pipe usually has super high wear resistance NBR wear resistant rubber is used in the rubber tube but there is no strict requirement for pressure The pressure of 12BA...

    Contact Now

  • Heavy Sand Blasting Rubber Hose

    Heavy Sand Blasting Rubber Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Wear resistant standard of sand blasting rubber pipe This is also the main basis for judging whether the quality of sand blasting rubber pipe is good or bad In the current standard according to ISO4649 method the wear volume of sand blasting rubber tube should not exceed 140 MM In addition the strength of interlaminar...

    Contact Now

  • Abrasion-resistant Rubber Sand-Blasting Hose

    Abrasion-resistant Rubber Sand-Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Bending Standard of Sandblasting Rubber Tube When it is tested at 23 degrees Celsius the minimum bending radius within 10 times the nominal inner diameter should not exceed 0 8 times the outer diameter while at 25 degrees Celsius no cracks can occur after bending Hebei Baoshi Sand Blast Hose 1

    Contact Now

  • Abrasion-resistant Sand-Blasting Rubber Hose

    Abrasion-resistant Sand-Blasting Rubber Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    The anti static sand blasting hose should keep the pressure for one minute but the length of the hose should not exceed 0 8 of the top and bottom and the outer diameter should not exceed 10 of the top and bottom For each meter the torsion should not exceed 60 ORDM Finally the blasting pressure of sand blasting rubber...

    Contact Now

  • Abrasion-resistant SandBlasting Rubber Hose

    Abrasion-resistant SandBlasting Rubber Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Technical Standards for Sandblasting Rubber Pipes 1 In the use of temperature the temperature of sand blasting rubber pipe is generally 20 70 degrees Celsius 2 In terms of material and structure the sand blasting hose should have the following composition First of all it needs an inner glue layer Secondly there is a...

    Contact Now

  • Abrasion-resistant Rubber Sand Blasting Hose

    Abrasion-resistant Rubber Sand Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Hydraulic Standards for Sandblasting Rubber Pipes The maximum working pressure of sand blasting rubber pipe is 0 63 MPa When it works under double working pressure it can t seep water and can t appear abnormal phenomena such as local bulging and expansion Hebei Baoshi Sand Blast Hose 1

    Contact Now

  • Abrasion-resistant Sand Blasting Rubber Hose

    Abrasion-resistant Sand Blasting Rubber Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Sandblasting rubber hose is an alias for sandblasting rubber hose which is mostly used for the surface of metals for wind pressure sandblasting rust removal and flax In addition it can be used for wet sand blasting and dry sand blasting in engineering construction It is mainly used in the fields of mechanical...

    Contact Now

  • Abrasion-resistant Rubber SandBlasting Hose

    Abrasion-resistant Rubber SandBlasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Classification of sand blasting rubber pipes Different types of sand blasting rubber pipes have different functions Its classification can be divided into three categories The first type of sand blasting rubber pipe is electrically connected the second type of M grade is sand blasting rubber pipe with conductive...

    Contact Now

  • Rubber Sand Blasting Hose

    Rubber Sand Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Founded in 2006 our company is a specialized manufacturer of sand blast hose suction hose and discharge hose Since the establishment we have controlled and inspected raw materials strictly to ensure the quality Meanwhile we are continuing to refine our manufacturing and processing systems to achieve customers...

    Contact Now

  • Common Rubber Mud Drainage Hose

    Common Rubber Mud Drainage Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: SNJG

    Connecting end of Large caliber flanged Hose Because nuts are easy to connect low cost and widely used and vibration is large under permissible conditions the problem of nut tightness should be fully considered and flanged connection should be used Steel Flanged Mud Suction

    Contact Now

  • Common Flexible Flanged Sludge Suction Hose

    Common Flexible Flanged Sludge Suction Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: SNJG

    The flexible flange mud discharge hose solves the problem of dislocation and distortion of the hose when replacing the pipeline reduces the difficulty of assembling or replacing the pipeline improves the working efficiency and prolongs the service life of the hose Steel Flanged Mud Suction

    Contact Now

  • Common Flexible Flanged Mud Suction Hose

    Common Flexible Flanged Mud Suction Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: SNJG

    Fluid compatibility of Large caliber flanged hose The fluid of large caliber rubber hose should conform to the product use rules and the product characteristics of high pressure steel wire braided rubber hose should ensure the management and safety of life in the prescribed use Steel Flanged Mud Suction

    Contact Now

Review

Ajmal Akhtar

Oct 21, 2019 4

The Drilling Hose Wire Spiral is perfect, with reasonable price and brilliant quality.
Mr.mr.sean Harrison

Oct 18, 2019 5

The Drilling Hose Wire Spiral is very nice. I would like to purchase it and the smart thing next time.
Hallgeir Neset

Oct 14, 2019 5

Very happy with the Drilling Hose Wire Spiral . Great value.
  • Related Information
The business upholds the philosophy of "Be No.1 in high-quality, be rooted on credit and trustworthiness for growth", will keep on to serve previous and new prospects from home and overseas whole-heatedly for Drilling Hose Wire Spiral , Drilling Hose Wire Winding , Drilling Hose Wire Wound , We are looking forwards to establishing long-term business relationships with worldwide customers.
Our primary intention should be to offer our clientele a serious and responsible enterprise relationship, delivering personalized attention to all of them for Drilling Hose Wire Spiral , Drilling Hose Wire Winding , Drilling Hose Wire Wound , We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade items in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market. We are willing to cooperate with business friends from at home and abroad and create a great future together.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List

Home

Phone

Skype

Inquiry