Communicate with Supplier? Supplier
Jane Ms. Jane
What can I do for you?
Chat Now Contact Supplier
 Tel:86-010-65856090 Email:jane.xiao@baoshihose.com

Hose Assembly For Coal Support - manufacturer, factory, supplier from China

(Total 24 Products for Hose Assembly For Coal Support)

  • Hose Assembly for Coal Hydraulic Support

    Hose Assembly for Coal Hydraulic Support

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: ZJJG

    Attention for high pressure hose transportation Rubber hose loading and transportation must not be excessive extrusion beyond the car body really need to exceed the car body we must carry out effective protection When handling rubber hoses they should not be dragged anywhere Heavy rubber hoses should be loaded and...

    Contact Now

  • High Temperature Pump Rubber Piston Assembly

    High Temperature Pump Rubber Piston Assembly

    • Model No.: PISTON

    • Transportation: Ocean,Land,Air

    Piston assembly is one of the main parts of the hydraulic end system of mud pump and also one of the vulnerable parts in drilling work The discharge pressure of mud pump is generated by reciprocating linear movement of piston assembly in piston The piston assembly is composed of piston core rubber sheet clamp spring...

    Contact Now

  • High Pressure Mud Pump NBR Piston Assembly

    High Pressure Mud Pump NBR Piston Assembly

    • Model No.: PISTON

    • Transportation: Ocean,Land,Air

    The common mud pump is piston type or plunger type The crankshaft of the pump is rotated by the power engine The crankshaft drives the piston or plunger reciprocating in the pump cylinder through the cross head The alternating action of suction and discharge valves press and circulate flushing fluids Piston assembly...

    Contact Now

  • High Pressure HNBR Pump Piston Assembly

    High Pressure HNBR Pump Piston Assembly

    • Model No.: PISTON

    • Transportation: Ocean,Land,Air

    Mud pump conveys flushing fluid such as mud or water to a borehole during drilling Mud pump is an important part of drilling equipment In the common positive circulation drilling the surface flushing medium clear water mud or polymer flushing fluid is directly sent to the bottom of the bit through the high pressure...

    Contact Now

  • High Pressure Pump HNBR Piston Assembly

    High Pressure Pump HNBR Piston Assembly

    • Model No.: PISTON

    • Transportation: Ocean,Land,Air

    Pistons made of polyurethane with strength greater than 60 MPa and hardness greater than Shao s 94 also have longer service life From the point of view of manufacture and use piston made of polyurethane material has more promotional value Piston assembly Piston and cylinder liner some without cylinder liner and...

    Contact Now

  • High Pressure NBR Pump Piston Assembly

    High Pressure NBR Pump Piston Assembly

    • Model No.: PISTON

    • Transportation: Ocean,Land,Air

    Piston rubber cup for mud pump is a kind of rubber cup Used for mud pump piston reciprocating motion seal in mud and crude oil medium There are two kinds of packaged piston cup and integral piston The former is made of oil resistant rubber lip and nylon root and is made of NBR and PU The working pressure is 19 6 MPa...

    Contact Now

  • High Pressure Pump NBR Piston Assembly

    High Pressure Pump NBR Piston Assembly

    • Model No.: PISTON

    • Transportation: Ocean,Land,Air

    Vulcanized integral rubber piston is made of piston rubber NBR or polyurethane directly vulcanized on the piston core It does not need to be fixed by pressure plate and clip spring It is suitable for all kinds of mud especially for high pressure jet drilling and ceramic cylinder liner It can be used interchangeably...

    Contact Now

  • High Temperature Rubber Piston Assembly

    High Temperature Rubber Piston Assembly

    • Model No.: PISTON

    • Transportation: Ocean,Land,Air

    Material classification Hydrogenated nitrile butadiene rubber HNBR suitable for high temperature high pressure high corrosion working environment working pressure 75 Mpa working temperature up to 150 C Hydrogenated nitrile butadiene rubber is a kind of rubber used in aviation Hydrogenated nitrile butadiene rubber HNBR...

    Contact Now

  • High Temperature Rubber Pump Piston Assembly

    High Temperature Rubber Pump Piston Assembly

    • Model No.: PISTON

    • Transportation: Ocean,Land,Air

    Material classification Polyurethane rubber It has excellent oil resistance and wear resistance The working temperature is not higher than 120 C It is suitable for oil based mud with working pressure below 35Mpa and working environment with high sediment content Nitrile Butadiene Rubber NBR It is suitable for ordinary...

    Contact Now

  • Pump Rubber Piston Assembly

    Pump Rubber Piston Assembly

    • Model No.: PISTON

    • Transportation: Ocean,Land,Air

    Material classification Nitrile Butadiene Rubber NBR It is suitable for ordinary drilling environment with working pressure below 20 Mpa and working temperature not higher than 120 C It has excellent wear resistance chemical corrosion resistance and long service life in common drilling environment Piston assembly...

    Contact Now

  • High Pressure Pump Rubber Piston Assembly

    High Pressure Pump Rubber Piston Assembly

    • Model No.: PISTON

    • Transportation: Ocean,Land,Air

    Piston and cylinder liner some without cylinder liner and directly with the inner wall of the liquid cylinder sealing elements are assembled on the piston assembly The reciprocating motion of the piston alternately changes the volume of the working chamber and realizes the process of pumping sucking and discharging by...

    Contact Now

  • Valve Body and Seat for Drilling Mud Pump

    Valve Body and Seat for Drilling Mud Pump

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: FTFZ

    Generally speaking a mud pump needs six sets of valve assembly divided into three in and three out and some fracturing trucks are equipped with valve assembly which is relatively small valve assembly is suitable for various domestic fracturing trucks fracturing pumps and mud pumps Valve Body And Valve

    Contact Now

  • Valve Body and Valve Seat for Mud Pump

    Valve Body and Valve Seat for Mud Pump

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: FTFZ

    Valve assembly with valve seat is called valve assembly The valve assembly is composed of valve body valve cap valve rubber skin valve seat centralizer valve spring etc

    Contact Now

  • Forged Steel Valve Body and Valve Seat

    Forged Steel Valve Body and Valve Seat

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: FTFZ

    Ductile iron is a kind of cast iron which replaces flake graphite in gray iron with globular or spherical graphite This change in the internal structure of the metal makes its mechanical properties better than ordinary gray cast iron and does not damage other properties Therefore valves made of ductile iron have...

    Contact Now

  • Rubber High Wear-Resistant Sand-blasting Hose

    Rubber High Wear-Resistant Sand-blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Diameter of abrasion resistant sand blasting pipe and inner diameter of hose wall thickness often refers to the thickness of inner glue outer diameter refers to the largest outer circle Products are mainly used in various tunnel projects tunnels caverns slope

    Contact Now

  • Rubber Wear-Resistant Sand-blasting Hose

    Rubber Wear-Resistant Sand-blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    The general working pressure of abrasion resistant sand blasting rubber pipe is less than 12 bars and the blasting pressure can reach 36 bars with higher blasting pressure Sometimes vacuum negative pressure parameters such as 0 8 bars to 0 9 bars are needed Common temperature range is 30 80 C and common wear...

    Contact Now

  • Common Wear-Resistant Sandblasting Rubber Hose

    Common Wear-Resistant Sandblasting Rubber Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Heavy duty sandblasting pipe is used in equipment sandblasting gravel fine pebble mud and other use environment The spiral steel wire is embedded in the sand blasting vacuum tube and the vacuum negative pressure can reach 0 9 bar in general High Wear resistance Sand Blast

    Contact Now

  • Common Rubber Wear-Resistant Sandblasting Hose

    Common Rubber Wear-Resistant Sandblasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Light Sand blasting Pipe Usually used in such environments as ship sandblasting quicksand operation etc The common inner glue is made of wear resistant NBR natural rubber material and the outer glue is packed with compound glue High Wear resistance Sand Blast

    Contact Now

  • Rubber Wear-Resistant Sandblasting Hose

    Rubber Wear-Resistant Sandblasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Wear resistant sand blasting rubber pipes are usually classified into light sand blasting pipes and heavy sand blasting pipes according to the working conditions and the loss degree of material particles to the conveying medium Spiral steel wire will make them suitable for negative pressure environment High Wear...

    Contact Now

  • Common Rubber Wear-Resistant Sand Blasting Hose

    Common Rubber Wear-Resistant Sand Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Common materials of abrasion resistant sand blasting hose abrasion resistant materials are usually used for internal and external rubber of sand blasting hose such as NBR acrylonitrile butadiene copolymer SBR oil filled styrene butadiene rubber or PARA rubber trilobal rubber with better performance of imported hose...

    Contact Now

  • Common Wear-Resistant Sand Blasting Rubber Hose

    Common Wear-Resistant Sand Blasting Rubber Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Uses of abrasion resistant sand blasting rubber pipe It is mainly used for conveying solid particles such as granules gravel cement quicksand concrete gypsum and so on It is suitable for all kinds of tunnel engineering tunnel tunnel and other engineering operations High Wear resistance Sand Blast Hose 1

    Contact Now

  • Rubber Wear-Resistant Sand Blast Hose

    Rubber Wear-Resistant Sand Blast Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Wear resistant sand blasting rubber pipe is a kind of material conveying pipe Common black sub yellow or transparent external tape wrapping is the majority common between the internal and external tape steel wire to suit negative pressure conditions High Wear resistance Sand Blast Hose 1 Features The internal rubber...

    Contact Now

  • Abrasion-resistant Heavy Rubber Sand Blasting Hose

    Abrasion-resistant Heavy Rubber Sand Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Structure of Sandblasting Rubber Tube 1 External rubber layer using SBR NR mixed conductive rubber 2 Inner rubber layer NBR high wear resistant rubber 3 Reinforcement layer using high

    Contact Now

  • Abrasion-resistant Heavy Sand Blasting Hose

    Abrasion-resistant Heavy Sand Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Sandblasting rubber pipe is a kind of material conveying hose which is used to convey abrasive media with large friction coefficient This kind of rubber pipe usually has super high wear resistance NBR wear resistant rubber is used in the rubber tube but there is no strict requirement for pressure The pressure of 12BA...

    Contact Now

Review

Akilah Harriott

Oct 17, 2019 4

I can complain about nothing. Good!
Vic Ong

Oct 16, 2019 4

The best Hose Assembly For Coal Support I have ever bought!
Karl-heinz Kroihsmajer

Oct 15, 2019 5

Excellent!
  • Related Information
To meet the customers' over-expected satisfaction , we have our strong team to provide our best overall service which includes marketing, sales, designing, production, quality controlling, packing, warehousing and logistics for Hose Assembly For Coal Support , Hose Assembly for Coal Support , Pipe Assembly for Coal Support , Our organization. Situated inside the national civilized cities the visitors is very easy unique geographical and economic situations. We pursue a "people-oriented meticulous manufacturing brainstorm construct brilliant" organization. hilosophy. Strict top quality management fantastic service reasonable cost in Myanmar is our stand on the premise of competition. If vital welcome to make contact with us by our web page or telephone consultation we're planning to be pleased to serve you.

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List

Home

Phone

Skype

Inquiry