Communicate with Supplier? Supplier
Jane Ms. Jane
What can I do for you?
Contact Supplier
 Tel:86-010-65856090

Spiral Drilling Hose - manufacturer, factory, supplier from China

(Total 24 Products for Spiral Drilling Hose)

  • Drilling Rubber Hose Wire Spiral

    Drilling Rubber Hose Wire Spiral

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: ZTJG

    The rotary drilling hose is used between the top of the standpipe and the rotating knuckles running up and down Marine slurry hose is used for high pressure slurry transportation between barge and offshore drilling platform usually more than 13 5m in length Shorter hose 9m or less used between pump and drilling rig i...

    Contact Now

  • Steel Wire Spiral Slurry Drilling Hose

    Steel Wire Spiral Slurry Drilling Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: ZTJG

    Structure of the Hose It consists of an inner rubber layer an inner rubber protective layer a middle rubber layer a steel wire winding layer and an outer rubber layer The inner lining of hose shall be composed of oil resistant and water resistant rubber The reinforcing layer of hose shall consist of textile and steel...

    Contact Now

  • Valve Body and Seat for Drilling Mud Pump

    Valve Body and Seat for Drilling Mud Pump

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: FTFZ

    Generally speaking a mud pump needs six sets of valve assembly divided into three in and three out and some fracturing trucks are equipped with valve assembly which is relatively small valve assembly is suitable for various domestic fracturing trucks fracturing pumps and mud pumps Valve Body And Valve

    Contact Now

  • Valve Body and Seat of Drilling Mud Pump

    Valve Body and Seat of Drilling Mud Pump

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: FTFZ

    Valve assembly refers to a set consisting of Valve body Valve seat and Valve rubber The Valve assembly is an important part of the hydraulic end of the mud pump used for drilling and plays a role in unidirectional mud

    Contact Now

  • Rubber High Wear-Resistant Sand-blasting Hose

    Rubber High Wear-Resistant Sand-blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Diameter of abrasion resistant sand blasting pipe and inner diameter of hose wall thickness often refers to the thickness of inner glue outer diameter refers to the largest outer circle Products are mainly used in various tunnel projects tunnels caverns slope

    Contact Now

  • Rubber Wear-Resistant Sand-blasting Hose

    Rubber Wear-Resistant Sand-blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    The general working pressure of abrasion resistant sand blasting rubber pipe is less than 12 bars and the blasting pressure can reach 36 bars with higher blasting pressure Sometimes vacuum negative pressure parameters such as 0 8 bars to 0 9 bars are needed Common temperature range is 30 80 C and common wear...

    Contact Now

  • Common Wear-Resistant Sandblasting Rubber Hose

    Common Wear-Resistant Sandblasting Rubber Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Heavy duty sandblasting pipe is used in equipment sandblasting gravel fine pebble mud and other use environment The spiral steel wire is embedded in the sand blasting vacuum tube and the vacuum negative pressure can reach 0 9 bar in general High Wear resistance Sand Blast

    Contact Now

  • Common Rubber Wear-Resistant Sandblasting Hose

    Common Rubber Wear-Resistant Sandblasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Light Sand blasting Pipe Usually used in such environments as ship sandblasting quicksand operation etc The common inner glue is made of wear resistant NBR natural rubber material and the outer glue is packed with compound glue High Wear resistance Sand Blast

    Contact Now

  • Rubber Wear-Resistant Sandblasting Hose

    Rubber Wear-Resistant Sandblasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Wear resistant sand blasting rubber pipes are usually classified into light sand blasting pipes and heavy sand blasting pipes according to the working conditions and the loss degree of material particles to the conveying medium Spiral steel wire will make them suitable for negative pressure environment High Wear...

    Contact Now

  • Common Rubber Wear-Resistant Sand Blasting Hose

    Common Rubber Wear-Resistant Sand Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Common materials of abrasion resistant sand blasting hose abrasion resistant materials are usually used for internal and external rubber of sand blasting hose such as NBR acrylonitrile butadiene copolymer SBR oil filled styrene butadiene rubber or PARA rubber trilobal rubber with better performance of imported hose...

    Contact Now

  • Common Wear-Resistant Sand Blasting Rubber Hose

    Common Wear-Resistant Sand Blasting Rubber Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Uses of abrasion resistant sand blasting rubber pipe It is mainly used for conveying solid particles such as granules gravel cement quicksand concrete gypsum and so on It is suitable for all kinds of tunnel engineering tunnel tunnel and other engineering operations High Wear resistance Sand Blast Hose 1

    Contact Now

  • Rubber Wear-Resistant Sand Blast Hose

    Rubber Wear-Resistant Sand Blast Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Wear resistant sand blasting rubber pipe is a kind of material conveying pipe Common black sub yellow or transparent external tape wrapping is the majority common between the internal and external tape steel wire to suit negative pressure conditions High Wear resistance Sand Blast Hose 1 Features The internal rubber...

    Contact Now

  • Abrasion-resistant Heavy Rubber Sand Blasting Hose

    Abrasion-resistant Heavy Rubber Sand Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Structure of Sandblasting Rubber Tube 1 External rubber layer using SBR NR mixed conductive rubber 2 Inner rubber layer NBR high wear resistant rubber 3 Reinforcement layer using high

    Contact Now

  • Abrasion-resistant Heavy Sand Blasting Hose

    Abrasion-resistant Heavy Sand Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Sandblasting rubber pipe is a kind of material conveying hose which is used to convey abrasive media with large friction coefficient This kind of rubber pipe usually has super high wear resistance NBR wear resistant rubber is used in the rubber tube but there is no strict requirement for pressure The pressure of 12BA...

    Contact Now

  • Heavy Sand Blasting Rubber Hose

    Heavy Sand Blasting Rubber Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Wear resistant standard of sand blasting rubber pipe This is also the main basis for judging whether the quality of sand blasting rubber pipe is good or bad In the current standard according to ISO4649 method the wear volume of sand blasting rubber tube should not exceed 140 MM In addition the strength of interlaminar...

    Contact Now

  • Abrasion-resistant Rubber Sand-Blasting Hose

    Abrasion-resistant Rubber Sand-Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Bending Standard of Sandblasting Rubber Tube When it is tested at 23 degrees Celsius the minimum bending radius within 10 times the nominal inner diameter should not exceed 0 8 times the outer diameter while at 25 degrees Celsius no cracks can occur after bending Hebei Baoshi Sand Blast Hose 1

    Contact Now

  • Abrasion-resistant Sand-Blasting Rubber Hose

    Abrasion-resistant Sand-Blasting Rubber Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    The anti static sand blasting hose should keep the pressure for one minute but the length of the hose should not exceed 0 8 of the top and bottom and the outer diameter should not exceed 10 of the top and bottom For each meter the torsion should not exceed 60 ORDM Finally the blasting pressure of sand blasting rubber...

    Contact Now

  • Abrasion-resistant SandBlasting Rubber Hose

    Abrasion-resistant SandBlasting Rubber Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Technical Standards for Sandblasting Rubber Pipes 1 In the use of temperature the temperature of sand blasting rubber pipe is generally 20 70 degrees Celsius 2 In terms of material and structure the sand blasting hose should have the following composition First of all it needs an inner glue layer Secondly there is a...

    Contact Now

  • Abrasion-resistant Rubber Sand Blasting Hose

    Abrasion-resistant Rubber Sand Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Hydraulic Standards for Sandblasting Rubber Pipes The maximum working pressure of sand blasting rubber pipe is 0 63 MPa When it works under double working pressure it can t seep water and can t appear abnormal phenomena such as local bulging and expansion Hebei Baoshi Sand Blast Hose 1

    Contact Now

  • Abrasion-resistant Sand Blasting Rubber Hose

    Abrasion-resistant Sand Blasting Rubber Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Sandblasting rubber hose is an alias for sandblasting rubber hose which is mostly used for the surface of metals for wind pressure sandblasting rust removal and flax In addition it can be used for wet sand blasting and dry sand blasting in engineering construction It is mainly used in the fields of mechanical...

    Contact Now

  • Abrasion-resistant Rubber SandBlasting Hose

    Abrasion-resistant Rubber SandBlasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Classification of sand blasting rubber pipes Different types of sand blasting rubber pipes have different functions Its classification can be divided into three categories The first type of sand blasting rubber pipe is electrically connected the second type of M grade is sand blasting rubber pipe with conductive...

    Contact Now

  • Rubber Sand Blasting Hose

    Rubber Sand Blasting Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: PSJG

    Founded in 2006 our company is a specialized manufacturer of sand blast hose suction hose and discharge hose Since the establishment we have controlled and inspected raw materials strictly to ensure the quality Meanwhile we are continuing to refine our manufacturing and processing systems to achieve customers...

    Contact Now

  • Common Rubber Mud Drainage Hose

    Common Rubber Mud Drainage Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: SNJG

    Connecting end of Large caliber flanged Hose Because nuts are easy to connect low cost and widely used and vibration is large under permissible conditions the problem of nut tightness should be fully considered and flanged connection should be used Steel Flanged Mud Suction

    Contact Now

  • Common Flexible Flanged Sludge Suction Hose

    Common Flexible Flanged Sludge Suction Hose

    • Brand: Baoshi

    • Packaging: Wooden Package

    • Certificate: API Q1, ISO9001:2008, ISO14001,OHSAS 18001

    • Model No.: SNJG

    The flexible flange mud discharge hose solves the problem of dislocation and distortion of the hose when replacing the pipeline reduces the difficulty of assembling or replacing the pipeline improves the working efficiency and prolongs the service life of the hose Steel Flanged Mud Suction

    Contact Now

Review

William Hunt

Mar 26, 2020 5

The Spiral Drilling Hose is very good and substantial.
Maria Salas

Mar 26, 2020 5

The Spiral Drilling Hose arrived in around 12 days to the UK. The service is perfect, I have no need to ask for more. Very happy. Thank you
Clint Higgs

Mar 12, 2020 5

Delivery was OK and the package was well.the Spiral Drilling Hose worth the money.
  • Related Information
Dedicated to strict quality management and considerate client company, our experienced team associates are generally available to discuss your demands and make certain full purchaser pleasure for Spiral Drilling Hose , Wire Spiral Drilling Hose , Oil Drilling Hose , We've been honest and open up. We glance ahead on your pay a visit to and developing trustworthy and long-term standing relationship.
"Our growth depends to the superior products ,great talents and repeatedly strengthened technology forces for Spiral Drilling Hose , Wire Spiral Drilling Hose , Oil Drilling Hose , We now have a good reputation for stable quality products well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets Walking into International Markets". We sincerely hope that we could do business with customers both at home and abroad. We expect sincere cooperation and common development!

Send Us a Message

We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.

Related Products List

Home

Phone

Skype

Inquiry